The price of nickel and stainless steel rose together. Nickel afternoon hand in hand with stainless steel together turn red up. Due to the temporary easing of geopolitical risks, risk assets are now picking up, nonferrous metals, stock markets, and so on have risen, the overall mood has temporarily improved. Ore prices are strong, the overlay of the epidemic on spot logistics or the formation of a certain impact. Phase, nickel and stainless steel materials to maintain high wide concussion pattern.
Nickel prices based on low inventory, tight supply and demand will still show high wide fluctuations. In addition, the current LME has low liquidity, so its sensitivity to capital will remain relatively high. Shanghai nickel-wide fluctuations are expected to continue in the 200,000-250,000 yuan wide repeated fluctuation trend. While stainless steel is affected by the stronger nickel pig iron, the cost support continues, but note that under the current demand is not effectively released, the upward space may also be affected, the stage is expected to fluctuate between 20000 and 22,000 yuan. The price of nickel produced such fluctuations, indicating that the price of the lithium battery may also be affected to a certain extent.
Lithium-ion batteries are divided into liquid lithium-ion batteries and polymer lithium-ion batteries. The electrolyte of lithium-ion batteries is fluid, so they are more unstable than lithium-polymer batteries, and they may explode if they are beaten by external forces or use substandard chargers. Many portable electronic products such as mobile phones and laptops use lithium batteries. In other words, many people have a "bomb" by their side. You must pay attention to the following points for safety reasons when purchasing.
1. Is there a clear indication of the capacity? Batteries that do not have a marked capacity (e.g. 1000mAh or 1000mAh) are likely to be of poor quality or recycled. Many cheap batteries on the market are made of recycled battery cores. Although the price is low, the lifespan is short, and the quality is unstable. Careless use may damage the phone.
2. There is no guaranteed standby time. Standby time refers to the continuous use time after the battery is installed in the mobile phone to the subsequent charging. Generally, the batteries sold on the market cannot guarantee the standby time for customers. This is because the quality of the batteries is unstable. Many cheap batteries use poor quality battery cores, so the standby time is short.
3. Whether to install a safety protection circuit board. Without a protective circuit board, the lithium battery is at risk of deformation, leakage and explosion. Under the vicious price-cutting competition, various companies seek lower-priced protection circuit boards or omit this device, making the market full of lithium batteries with a danger of explosion. Consumers cannot tell whether there is a protective circuit board from the appearance, so it is best to choose a reputable merchant to buy.
On January 19, 2022, The Ministry of Industry and Information Technology will guide relevant units to speed up the formulation of lithium battery coding standards.
Lithium primary battery
With metal lithium as the negative electrode and heat-treated manganese dioxide as the positive electrode, the separator is made of PP or PE film. The cylindrical battery is the same as the lithium ion battery separator. The electrolyte is an organic solution of lithium perchlorate, cylindrical or a button type. . The battery needs to be produced in a dry environment with a humidity of ≤1%.
Features: low self-discharge rate, annual self-discharge can be ≤ 1%, fully sealed (metal welding, laser seal) battery can meet ten years of life, the semi-sealed battery is generally five years, if the work control is not reasonable, it can not reach this life. Yiwei, which has done an excellent job developing cylindrical lithium-manganese batteries, has realized automatic production. The battery can be tested for short-circuit and over-discharge without explosion.
Generally, there is a button-type lithium battery on the motherboard of a desktop computer, which provides a weak current and can be used generally for about three years. Some hotels also use lithium-manganese dioxide batteries for access control cards, instruments, etc., which are used year by year decline.
With metal lithium as the negative electrode, the positive electrode and the electrolyte are thionyl chloride (thionyl chloride), the cylindrical battery has electricity after assembly, and the voltage is 3.6V. quality) battery with the highest capacity. It is suitable for electronic instruments and equipment that cannot be maintained frequently and provides good current.
Other lithium batteries include lithium-ferrous sulfide batteries, lithium-sulfur oxide batteries, etc.
High-quality lithium batteries supplier
Luoyang Moon & Star New Energy Technology Co., LTD, founded on October 17, 2008, is a high-tech enterprise committed to research, development, production, processing, sales, and technical services of lithium ion battery anode materials. After more than ten years of development, the company has gradually developed into a diversified product structure with natural graphite, artificial graphite, composite graphite, intermediate phase and other harmful materials (silicon-carbon materials, etc.). The products are widely used in high-end lithium ion digital power and energy storage batteries. If you are looking for Lithium battery anode material, click on the needed products and send us an inquiry：email@example.com
3D printing technology emerged in the mid-1990s and is actually the latest rapid prototyping device utilizing technologies such as light curing and paper lamination. It is basically the same as ordinary printing. The printer is equipped with "printing materials" such as liquid or powder. After connecting to the computer, the "printing materials" are superimposed layer by layer through computer control, and finally the blueprint on the computer is turned into a real thing. This printing technology is called 3D stereo printing technology.
Element boron is a black or dark brown powder,its hardness is second only to diamond,and has a relatively brittle texture.It is mainly used in metallurgy,medicine,ceramics,nuclear industry,chemical industry and other industries.…
Inconel 718 alloys is a precipitation-hardening nickel-iron-based superalloy containing niobium and molybdenum. Its microstructure is austenite and has excellent comprehensive properties.…
High-silicon aluminum alloy is a binary alloy composed of silicon and aluminum. It is an alloy material mainly used in aerospace, space technology and portable electronic equipment.…