Products

  • 0
  • 0

Introduction to Concrete Additives (2)

Russian president demanded that exports of Russian gas to "unfriendly" countries be settled in rubles. The demand has raised concerns in Germany about possible supply disruptions and the impact on industry and households if utilities do not pay in robles. Europe gets about 40% of its gas from Russia. Last year, Europe imported about 155 billion cubic meters. Germany, Europe's largest economy, depends heavily on Russian gas.

The chief executive of Germany's E.ON said the German economy would face "significant damage, which should be avoided if possible" without Russian supplies. He also said it would take Germany three years to wean itself off Russian gas.  

In the event of a supply disruption, Germany's gas network regulator would prioritize home heating over industrial use, so energy-hungry manufacturers such as steelmakers would be the first to suffer, he said.

The volatile international situations will continue to affect the markets and prices of many commodities like the Concrete Additive.

The concrete additive is a material that can improve the properties of the concrete mixture or hardened concrete by adding not more than 5% of the weight of cement in the process of mixing concrete (except for special circumstances).

Using concrete additives is one of the most effective ways to improve concrete strength, improve performance and save cement and energy. 

There are various types of concrete additives. In the last article Introduction to Concrete Additives (1), we talked about concrete water reducers and early strength agents. In this article, the set retarder, the air-entraining agent, and the accelerating agent are going to be talked about.

 

Set retarder:

Set retarders are additives that slow the hydration rate and heat of cement and gypsum, and prolong the setting time. The purpose of adding retarder in commercial concrete is to prolong the hydration and hardening time of cement so that the new mixed concrete can maintain plasticity for a longer time, so as to adjust the setting time of the new mixed concrete.

Hardening effect: 

1. The impact on strength: Excessive mixing will cause concrete 24 hours or even 72 hours is still not solidified, thus affecting the need for early strength of concrete and delaying the construction progress. There is no obvious influence on the concrete of proper age. 

2. The impact on shrinkage: Moderate use has no obvious effect on shrinkage. When excessive use can cause coping concrete because moisture evaporates excessive generation dry crack contraction and contraction crack. 

3. The impact on antifreeze durability: The antifreeze durability of concrete mixed with retarder is similar to that without retarder. 

 

Air entraining agent:

The air entraining agent is a hydrophobic surface-active agent, dissolved in water after joining the concrete mixture, in the mixing process can produce a large number of tiny bubbles. 

Air entraining agents can improve the workability, water retention, and cohesion of concrete mixture, improve the fluidity of concrete, and introduce a large number of admixtures evenly distributed, closed, and stable small bubbles in the mixing process of concrete mixture. 

The main varieties of air entraining agents include rosin resin, alkyl and alkyl aromatic sulfonic acid, fatty alcohol sulfonic acid, saponin and protein salt, petroleum sulfonic acid, and so on. The commonly used dosage is cement weight 50 ~ 500ppm. Air entraining agent is mainly used for structures with high freezing resistance requirements, such as concrete dams, road surfaces, bridge decks, aircraft yard track surfaces, and other large areas vulnerable to freezing. 

 

Accelerating agent:

The accelerating agent is a kind of additive that can make concrete quickly set and harden when added to concrete. The main types are inorganic salts and organic species.  Powdery solid, its admixture dosage accounts for cement dosage in concrete only 2% ~ 3%, but can make concrete in 5min initial coagulation, accelerating agent in 12min condensation. In order to achieve the purpose of rush repair or fast condensation of concrete in the tunnel. It is an indispensable additive in the shotcrete construction method.  Their function is to speed up the hydration and hardening of cement, forming sufficient strength in a very short period of time to ensure the requirements of special construction. 

 

Suppliers of Concrete Additives

TRUNNANO is a reliable concrete additives supplier with over 12-year experience in nano-building energy conservation and nanotechnology development.

If you are looking for high-quality concrete additives, please feel free to contact us and send an inquiry. (sales@cabr-concrete.com)

We accept payment via Credit Card, T/T, West Union, and Paypal. Trunnano will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.


Because of the conflict between Russia and Ukraine, there is a shortage of natural gas supply. At the same time, other renewable energy sources cannot produce enough electricity, so electricity prices have soared in many countries of the world. For this reason, I assume the supply and prices of the Concrete Additive would keep being influenced by the high energy prices.

Inquiry us

Our Latest Products

Description of zinc stearate

The zinc stearate liquid is called zinc stearate emulsion. It has a wide range of applications and can be used as a release agent, color retention agent,…

The preparation method of lithium sulfide

Lithium sulfide, molecular formula: Li2S, lithium sulfide, molecular weight: 45.95. White to yellow crystals. With an anti-fluorite structure.…

What is the scope of application of boron nitride?

Boron nitride is a crystal composed of nitrogen atoms and boron atoms.The chemical composition is43.6%boron and56.4%nitrogen,with four different variants:hexagonal boron nitride,rhombohedral boron nitride,cubic nitride Boron,and wurtzite boron nitrid…