High Purity Titanium Silicide TiSi2 Powder CAS 12039-83-7, 99.5%
U.S. natural gas futures rose about 5 percent to a near nine-week high as global energy prices surged on concerns over a pricing plan for energy exports, keeping U.S. LNG export demand near record highs. U.S. natural gas prices have risen despite forecasts of mild weather and lower-than-expected demand, which will allow utilities to fill up storage facilities next week. On Wednesday, Germany launched an emergency plan to manage gas supplies in Europe's largest economy. If natural gas supplies are interrupted or stopped, the German government could take unprecedented steps to limit electricity supply.
Affected by the increase in the price of natural gas, the price of the TiSi2 Powder will also increase.
About Titanium Silicide TiSi2 Powder:
With the rapid development of large integrated circuits (ULSI), the size of the equipment and equipment is getting smaller, the requirements for equipment size, film quality, and thickness uniformity are getting higher.
At present, the wire width of the semiconductor device has been reduced to less than 0.1 μm, so it is impossible to obtain a continuous conductor having a low resistance during the original process.
New materials, new processes, and new deposition systems must be found to improve or replace aluminum and heavy-doped polysilicon for circuit metallization.
In these new materials, metal silicon having high conductivity and high-temperature stability has increasing interest, compatible with the current microelectronic manufacturing process. Titanium Disilicide has low resistivity, high temperature and good stability.
In a commonly studied metal silicide (such as TSI2, Nisi, Cosi2, WSI2, Tasi2, MOSI2), silicide (Tisi2) has ideal characteristics: high conductivity, high selectivity, good thermal stability, good SI Adsorption, good process adaptation of silicon adaptive connection parameters. Therefore, in the integrated circuit device, titanium silicide is widely used to produce a metal oxide semiconductor (MOS), a metal oxide semiconductor field-effect transistor (MOSFET) and a dynamic random access memory (DRAM) gate, source/leakage, mutual contact ohm. Feel free to send an inquiry to get the latest price if you would like to buy Titanium Silicide TiSi2 Powder in bulk.
Characteristics of Titanium Silicide TiSi2 Powder:
Titanium silicide TiSi2 powder (CAS 12039-83-7) has a high melting point, high corrosion resistance, high oxidation resistance, good electrical conductivity, high temperature ductility, a binary alloy systemthe intermediate phase.
Technical Parameter of Titanium Silicide TiSi2 Powder:
Product Name |
MF |
Purity |
Particle Size |
Melting Point |
Density |
Color |
titanium silicide |
TiSi2 |
99% |
5-10um |
1620℃ |
4.0 g/cm3 |
black |
Chemical Composition of Titanium Silicide TiSi2 Powder:
TiSi2 |
Ti |
Si |
C |
P |
Fe |
S |
>99% |
46.32% |
52.5% |
0.02% |
0.02% |
0.19% |
0.01% |
How is Molybdenum Silicide MoSi2 Powder produced?
Di silicide can be obtained from the reaction between titanium or hydride and silicon.
Ti + 2 Si → Tisi2
Aluminum heat can also be performed by the ignition of aluminum powder, sulfur, silica and titanium dioxide or hexafluoritititoetice, by electrolysis of hexafluoride titanate and titanium dioxide, or through tetrachloride reaction.
Another method is to react with titanium tetrachloride to silane, dichloronilane or silicon.
TiCl4 + 2 SiH4 → Tisi2 + 4 HCl + 2 H2
TiCl4 + 2 SiH2Cl2 + 2 H2 → Tisi2 + 8 HCL
TiCl4 + 3 Si → Tisi2 + SiCL4
Applications of Molybdenum Silicide MoSi2 Powder:
Titanium silicide is used in the semiconductor industry. It is typically grown by means of salicide technology over silicon and polysilicon lines to reduce the sheet resistance of local transistor connections. In the microelectronic industry, it is typically used in the C54 phase.
1. Silicide Titanide is low, the melting point is high, and the chemical properties are stable, and there is a broad use prospect in the microelectronics field.
2. Aerospace industry, ship submarine manufacturing, medical, jewelery manufacturing.
Packing & Shipping of Titanium Silicide TiSi2 Powder :
We have many different kinds of packing which depends on the titanium silicide TiSi2 powder quantity.
Titanium silicide TiSi2 powder packing: vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Titanium silicide TiSi2 powder shipping: could be shipped out by sea , by air, by express as soon as possible once payment receipt.

Titanium Silicide Properties
|
Other Names |
TiSi2 powder, titanium disilicide |
CAS No. |
12039-83-7 |
Compound Formula |
TiSi2 |
Molecular Weight |
104.04 |
Appearance |
Black Powder |
Melting Point |
1470 °C |
Boiling Point |
N/A |
Density |
4.02 g/cm3 |
Solubility in H2O |
N/A |
Exact Mass |
103.9018 |
|
|
|
|
Titanium Boride Health & Safety Information
|
Signal Word |
N/A |
Hazard Statements |
N/A |
Hazard Codes |
N/A |
Risk Codes |
N/A |
Safety Statements |
N/A |
RTECS Number |
N/A |
Transport Information |
N/A |
WGK Germany |
N/A |
Due to the impact of COVID-19, russia-Ukraine conflict and international trade friction, the global economy is facing great challenges. Overseas trade is shrinking, supply chains are not smooth, oil prices are rising, freight rates are rising, and global trade and economic recovery are becoming more uncertain, which brings many risks and challenges to the company's business. The price of the TiSi2 Powder can also be influenced by the above factors. To get the price of the latest TiSi2 Powder, you are welcome to send email contact.
Inquiry us