News

  • 0
  • 0

Global Titanium Carbide powder market trend 2022-2029 What is Titanium Carbide TiC Powder? by Newswrigleyfieldnews

US President recently decided to invoke a Cold War-era defense law to encourage domestic Titanium Carbide powder.

Introduction to Titanium Carbide TiC Powder
The chemical formula for titanium carbide is TiC. It is a steel-gray crystal with a metallic luster. It has thermal conductivity and electrical conductivity, and its electrical conductivity decreases with the increase of temperature, so it shows the property of medal. It is a hard, high melting point compound, second only to diamond in hardness, with a microhardness of 2850 kg/mm2. The lattice constant a=4.173×10-8cm. Melting point 3150, boiling point 4820, relative density 4.9. TiN and TiO have the same lattice and the same parameters, so a series of continuous solid solutions can be formed between them. When heated to above 1500 in H2 gas, C removal gradually occurs. The mixture of Ti(C, N) carbon nitride reacts with N2 gas above 1200 to form a variable composition. The oxidation rate of TiC is slow at 800, but the powder TiC can be burned in O2 at 600 to generate TiO2 and CO2. At 1200, TiO2 and CO are produced by reaction with O2 gas. It does not interact with water, but can react with water vapor to generate TiO2, CO, and H2 at temperatures above 700. It does not react with CO, but reacts with CO2 at 1200 to generate TiO2 and CO. Insoluble in hydrochloric acid and lye, soluble in nitric acid and aqua regia.
 

Titanium Carbide TiC Powder Properties
Other Names titanium(IV) carbide, TiC powder
CAS No. 12070-08-5
Compound Formula TiC
Molecular Weight 40.1
Appearance black powder
Melting Point 3160°C
Boiling Point 4820°C
Density 4.93g/cm3
Solubility in H2O insoluble
Exact Mass 59.947

 

Titanium Carbide Nanoparticles Nano TiC Powder CAS 12070-08-5
 

 
 

Preparation Methods of Titanium Carbide TiC Powder
1. Carbothermic reduction 
TiO2 was reduced with carbon black at 1700-2100, and the chemical reaction formula was: TiO2(S)+ 3C(s)=TiC(S)+2CO(g). 
2. Direct carbonization method 
TiC was prepared by the reaction of Ti powder and carbon powder. 
Ti(s)+C(s)=TiC 
Due to the difficulty in preparing submicron Ti powder, the application of this method is limited. The above reaction takes 5-20 hours to complete, the reaction process is difficult to control, and the reactants agglomerate seriously. It requires further grinding to prepare fine TiC powder. In order to obtain a purer product, it is necessary to purify the fine powder after ball milling by chemical method. 
3. Chemical vapor deposition 
The synthesis method utilizes the reaction between TiCl4, H2 and C. 
TiCl4(g)+2H2(g)+C(s)=TiC(g)+4HCl(l) 
The reactants react with hot tungsten or carbon monofilaments. TiC crystals grow directly on the monofilaments. The yield and sometimes even quality of TiC powders synthesized by this method are strictly limited. 
4. Sol-gel method 
The invention relates to a method for preparing small particle size products by fully mixing and dispersing materials with solution. It has the advantages of good chemical uniformity, small powder size, and narrow distribution, low heat treatment temperature, but the synthesis process is complex, drying shrinkage is large.
5. Microwave method 
Using nano TiO2 and carbon black as raw materials, using the principle of carbon thermal reduction reaction, using microwave energy to heat the material. In fact, the dielectric loss of materials in the high-frequency electric field is used to convert microwave energy into heat energy, so that nano TiO2 and carbon can synthesize TiC. 
TiO2+3C=TiC+2CO(g) 
 

Applications of Titanium Carbide TiC Powder
1. Used in cutting tools, wear-resistant coating, mold manufacturing, and other fields;  
2. Raw materials for the production of ceramics and hard metallurgical parts by powder metallurgy, such as drawing film, hard alloy die, etc. Polyphase ceramics can be applied to hard cutting tools, military armor materials, aerospace components, such as gas tanks, engines, nozzle lining, turbine rotors, blades, and structural components in nuclear reactors; 
3. As a coating material, it can be used in diamond coating, tritium anti-coating in the fusion reactor, electric contact coating, excavator cutter coating, as well as foam ceramics, infrared radiation ceramics, etc. 
 

Main Supplier of Titanium Carbide TiC Powder
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality titanium carbide TiC Powder, please feel free to contact us and send an inquiry. ([email protected])

 

The negative electrode material is the carrier of lithium ions and electrons during the charging process of the battery and plays the role of energy storage and release. In the battery cost, the negative electrode material accounts for about 5%-15%, which is one of the important raw materials for lithium-ion batteries. The global sales of lithium battery anode materials are about 100,000 tons, mainly in China and Japan. According to the current growth trend of new energy vehicles, the demand for anode materials will also show a state of continuous growth. At present, the global lithium battery anode materials are still dominated by natural/artificial graphite, and new anode materials such as mesh carbon microspheres (MCMB), lithium titanate, silicon-based anodes, HC/SC, and metal lithium are also growing rapidly.
Our company provides anode materials and Titanium Carbide powder. If you need to know more anode materials and Titanium Carbide powder, please feel free to contact us.

Inquery us

Our Latest News

Global early strength agent market trend 2023-2027 Study On Early Strength Effect of Lithium Carbonate On Mortar by Newswrigleyfieldnews

Mortar early strength agent is an important mortar additive, which has an important influence on the performance of mortar. it can improve construction efficiency and save construction cost.…

Global MoS2 powder market trend 2022-2027 Lubrication of Molybdenum Disulfide MoS2 by Newswrigleyfieldnews

Molybdenum disulfide is a solid powder made from natural molybdenum concentrate powder, which is the modern…