Foam concrete used as thermal insulation material
In terms of international pricing benchmarks, according to the CP data released by Saudi Aramco, the propane contract price (CP) in March was $895 / ton, up $120 / ton from the previous month, up 15.48% from the previous month and up 43.20% from the same period last year. Butane contract price (CP) in March was 920 US dollars/ton, up 145 US dollars/ton compared with last month, up 18.71% month-on-month, up 54.62% compared with the same period last year; In March, CP in Saudi Arabia rose sharply, giving a strong boost to the international and domestic LPG market. Benchmark LPG prices are higher than a year ago as the economy continues to recover and demand for crude oil continues to repair. According to this trend, the market price of concrete foaming agent will also be affected to a certain extent.
Foam concrete contains a large number of closed pores, the air in the pores is a good adiabatic medium, which can cut off the heat exchange. The lower the density, the more pores, the better the adiabatic property. Especially when the density is less than 500 μ m? The thermal conductivity of foamed concrete is less than 0.09w/m.k. Generally speaking, the material with thermal conductivity lower than 0.23 is called thermal insulation material, and the thermal insulation material lower than 0.14w/m.k is called thermal insulation material. Most of the foamed concrete is lower than 0.14w/m.k, and most of them are lower than 0.09w/m.k, so it is a good thermal insulation material.
1. Used for thermal insulation in buildings
Building thermal insulation if all the application of foam concrete, including roof thermal insulation layer, wall insulation layer, floor heating insulation layer (or cushion), is equivalent to using foam concrete to wrap the whole house, one square meter building area needs 0.2m3~0.5m3 foam concrete (roof, floor, four walls are calculated by 5cm insulation layer), a building with a building area of 10,000 square meters, you need foam concrete 2000m3~5000m3.
2. Used for building thermal insulation block
Non-load-bearing thermal insulation block: density 300kg/m3, thermal conductivity 0.05~0.08W/ m k, compressive strength 0.5MPa. The thermal insulation effect of this kind of block is the most ideal, and it is the product with the largest demand for building energy saving and the most lacking in the market. Ultra-light block is the development direction of foam concrete, it can achieve integrated thermal insulation, the wall itself can meet the requirements of 65% energy saving, save the external thermal insulation treatment, and reduce the building thermal insulation cost by 40%, 50%.
Load-bearing thermal insulation block: density 1000~1200kg/m3, compressive strength greater than 10MPa, thermal conductivity 0.18-0.22; it is lighter than red brick, but the thermal insulation is twice as high. This kind of block can completely replace red brick for load-bearing wall, it and thermal insulation, load-bearing, lightweight three functions in one, to replace red brick has great advantages, has a larger market.
3. Used for cold storage heat preservation
Foam was originally used in cold storage thermal insulation, but foam concrete pouring or masonry insulation was used in developed countries because it is easy to aging, shrinking and flammable. It mainly adopts integral cast-in-place, roof, wall, ground all foam concrete cast-in-place, no cold bridge, no gap.
4. Used for thermal insulation of industrial furnace
The main products are fire-resistant and thermal insulation bricks.
Large industrial furnaces such as iron and steel plants, glass plants, ceramic plants, non-ferrous metal smelters and cement calcination kilns need to build a layer of thermal insulation refractory brick on the outside of refractory bricks in order to reduce energy consumption. The original use of floating bead brick, alumina foam brick, the price is very high, now foam concrete refractory brick has replaced the high-priced traditional products, the price is less than half, very competitive.
Concrete Additives Supplier
TRUNNANO is a reliable foaming agents supplier with over 12-year experience in nano-building energy conservation and nanotechnology development.
If you are looking for high-quality CLC foaming agents, please feel free to contact us and send an inquiry. (firstname.lastname@example.org)
We accept payment via Credit Card, T/T, West Union, and Paypal. TRUNNANO will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.
According to the bank of Spain's latest forecast data, the average inflation is expected to hit 7.6% in 2022, but the average wage increase for workers in this country is expected to be less than 4% in 2022.
If the Bank of Spain's forecast comes true, the gap between price and wage growth in Spain in a single year will be the largest since 1984.
Prices in Spain rose 9.8% year on year in March 2022 and average wages rose 2.4% year on year, with the Bank of Spain forecasting that the country's inflation rate will improve from July.
Recent changes in the international situation have had a big impact on commodity and energy prices. How the prices of the concrete foaming agent will develop in the future is still uncertain.