The latest forecast from consulting firm AlixPartners is that the chip shortage may cost the global auto industry $110 billion; it will reduce global auto TaC powder.
Introduction to Tantalum Carbide TaC Powder
Tantalum carbide is a kind of transition metal carbide. Black or dark brown metallic powder, cubic crystal system, hard. Melting point 3880℃, boiling point 5500℃, relative density 13.9, hardness 9 ~ 10. Insoluble in water, slightly soluble in sulfuric acid and hydrofluoric acid, soluble in a mixture of hydrofluoric acid and nitric acid.
Its chemical properties are extremely stable. It has excellent physical and chemical properties, such as high hardness, high melting point, good electrical conductivity, and thermal shock resistance, good chemical corrosion resistance, high oxidation resistance, catalytic performance, etc.
|Tantalum Carbide TaC Powder Properties|
|Other Names||tantalum(IV) carbide, TaC powder|
|Appearance||brown to dark brown powder|
|Boiling Point||4780-5470 °C|
|Solubility in H2O||insoluble|
Applications of Tantalum Carbide TaC Powder
Tantalum carbide is mainly used for cemented carbide, capacitors, electronic devices, high-temperature components, chemical equipment, and armor piercing shells.
1. Cemented carbide
Tantalum carbide plays an important role in cemented carbide. It improves the properties of the alloy by improving the fiber structure and phase transformation dynamics, making the alloy have higher strength, phase stability, and processing deformation ability. Tantalum carbide has a very high melting point (4000℃) and good thermodynamic stability. Tantalum is particularly effective in promoting nucleation and preventing carbon precipitation from nucleated brittle films formed during late solidification. Its main function is to prevent cemented carbide grain from growing up. In addition, it forms a third dispersion phase with TiC besides WC and Co, which significantly increases the thermal shock resistance, crescent hole wear resistance, and oxidation resistance of cemented carbide, and improves its redness and hardness.
TaC is added into the alloy in different ways, which will greatly affect the properties of the alloy. On the other surface, the TiC-TaC-WC core phase formed by adding TaC to the alloy as TiC-TaC-WC solid solution has a larger sub-crystal size and smaller microscopic strain than the TiC-TaC-WC core phase, and the former one has better physical and mechanical properties and longer cutting life.
2. Electronics industry
In recent years, transition metal carbides have attracted much attention due to their chemical stability, high hardness, strong oxidation and corrosion resistance, low resistivity, and many other advantages. Carbide nanomaterials show great potential in metal coatings, tools, machine parts, and composites. Among all the carbide nanomaterials, silver carbide is one of the most popular materials, and also one of the materials with the greatest potential. Tantalum carbide not only inherits many advantages of carbide nanomaterials, but also has its own unique side, such as high hardness (Mohs hardness is 9-10 at room temperature, high melting point (about 3880℃), high Young's modulus (283-550 GPa), strong conductivity (conductivity is 32.7-117.4μ ω ·cm at 25℃), high-temperature superconductivity (10.5K), strong resistance to chemical decay and thermal shock, and high catalytic activity for ammonia decomposition and hydrogen separation.
At present, tantalum carbide powder and whisk tantalum carbide have been prepared by means of carbothermic reduction, thermal plasma, solvothermal, sol-gel, microwave heating, alkali reduction, self-propagating high-temperature synthesis, and high-frequency induction heating sintering.
Among carbides, the best melting resistance is tantalum carbide (TaC) (melting point 3890℃) and hafnium carbide (HfC) (melting point 3880℃), followed by zirconium carbide (ZrC) (melting point 3500℃). These materials have excellent mechanical properties at high temperatures, far exceeding the best polycrystalline inks. Tantalum carbide, in particular, is the only material that maintains certain mechanical properties over the temperature range of 2900℃ to 3200℃. However, the disadvantage of tantalum carbide is that it is very sensitive to thermal shock, and the low thermal conductivity and high thermal expansion coefficient of carbide become the biggest obstacle to the application of aerospace materials. The addition of tantalum carbide to carbon/carbon composites will have higher thermal conductivity and lower thermal expansion conditions, and exert the oxidation resistance and ablative resistance of refractory metals.
Main Supplier of Tantalum Carbide TaC Powder
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality tantalum carbide TaC powder, please feel free to contact us and send an inquiry. ([email protected])
The technology and telecommunications industry is advancing at a rapid pace in a process of constant innovation and excitement. Tech devices and infrastructure are becoming smarter and more connected, powered by emerging technologies such as 5G and artificial intelligence (AI) for the Internet of Things. Advances in IT service delivery, particularly the adoption of cloud computing and edge computing technologies, are supporting digital transformation in businesses and the wider economy.
Product name are widely used in technical equipment, the market demand for TaC powder continues to expand, and a series of processes such as the management and sales of TaC powder will continue to improve and develop. If you need a TaC powder, please contact us.
Hafnium boride, gray with metallic luster crystals. The melting point is 3250 degrees Celsius, the conductivity is large, and the chemical properties are stable.…
Silicon nitride is known as Si3N4 powder, it's a super-hard substance, which has lubricity itself, and is resistant to wear and oxidation at high temperatures.…
Silicon carbide(SiC)is a lightweight ceramic material with high strength properties comparable to diamond.The microscopic shape of silicon carbide powder is hexagonal crystals.…